Technical library
Estimate bare-metal mass from nominal geometry. Results are theoretical, not measured shipment weights.
Formula
A = t × (width + height − t). For a prismatic section, V = A × length. Mass = V × density.
Worked example
width: 100 mm; height: 100 mm; thickness: 10 mm; length: 100 mm. At 2700 kg/m³ and one piece, the calculated mass is 0.513000 kg.
Assumptions and limits
Assumes sharp corners and uniform thickness. For real radiused extrusions, use supplier section area in the custom-section calculator.
Density defaults to a rounded 6061 reference. Change it for the actual material. Read the mass-estimation guide.
