A commercially pure aluminium designation with 99.5% minimum aluminium in the cited reference. Product-specific condition is essential when interpreting its properties.
Selected reference facts; incomplete alloy coverage. Keep typical values, source minima and composition limits distinct. Reference records are not certificates or design allowables.
Grade, forms and temper conditions
1000 series · Extruded profiles, Rod and bar, Tube
Reviewed temper examples: Not specified in the available source. These do not establish every possible alloy-form-temper supply combination.
| Property | Value | Unit | Temper / form | Condition | Basis / verification | Source ID |
|---|---|---|---|---|---|---|
| Density | 0.0975 | lb/in³ | Not specified / Extrusion | Temperature not specified | typical / single-source | hydro1xxx |
Mechanical properties
Condition-specific mechanical data is not verified and remains withheld.
| Element | Minimum wt % | Maximum wt % | Source ID |
|---|---|---|---|
| Al | 99.5 | — | hydro1xxx |
Fabrication and material selection
The referenced library lists this alloy for extrusion, but does not publish a mechanical-property row for it. Strength values remain withheld. Verify the exact product and temper independently.
Applications and product forms
Confirm the end-use requirements against the supplied material and governing specification.
Standards and acceptance
Identify the governing product specification by the actual form and manufacturing route. A grade designation alone does not establish compliance or equivalence. Confirm the edition, required condition, inspection and dimensional limits through the supplier and an authorized specification.
Product-specific standard scopes · Compare material conditions · Engineering calculators
Technical questions
Are typical values delivery limits?
No. A typical reference value describes the source condition; it is not a guaranteed minimum for a delivered lot.
Which temper and thickness should I compare?
Compare the same material form, temper, thickness/test condition, unit and value basis. Different conditions cannot be silently treated as interchangeable.
Technical sources and verification
Selected reference facts checked 14 October 2026. Source values apply to their stated material condition and are not certification of supplied stock.
- Hydro 1xxx extrusion data — 2019/01 (February 2019)
